Name: Yamaha MG16X CV 16-Input 4-Bus Mixer With Effects
SKU: 73574
Availability: InStock

Yamaha MG16X CV 16-Input 4-Bus Mixer With Effects

$87.00

Housed in a rugged steel chassis, the MG16X CV can accommodate up to 16 inputs and offers a balanced stereo output. Featuring D-Pre discrete Class-A microphone preamplifiers for pristine sound, it includes AUX busses for the built-in SPX effect with 24 presets and three more are available. Eight channels of single-knob compression are also included.

The MG16X can accept XLR, 1/4″ phone and RCA-type pin jack inputs, and offers XLR and phone outputs. The MG16X offers faders, and lit channel on/off switches for easy visual indication of settings.

Rugged, powder-coated steel chassis for superior durability
Discrete Class-A microphone preamps
Built-in SPX digital effects with 24 programs
Switchable +48V phantom power
Color-coded controls offer easy operation

General

Frequency response input to STEREO OUT: +0.5dB/-1.5dB (20Hz to 48kHz), refer to the nominal output level @ 1kHz, GAIN knob set to min
Total Harmonic Distortion (THD+N) input to STEREO OUT: 0.03 % @ +14dBu (20Hz to 20kHz), GAIN knob set to min
Crosstalk (1kHz): -78dB
Hum and Noise (20Hz to 20kHz)

Equivalent Input Noise: Crosstalk (1kHz)
Residual Input Noise: -102dBu (STEREO OUT, STEREO master fader set to min)

Input Channels

Mono [MIC/LINE]: 8
Mono/Stereo [MIC/LINE]: 2
Stereo [LINE]: 2

Output Channels

STEREO OUT: 2
MONITOR OUT: 1
PHONES: 1
AUX SEND: 4
GROUP OUT: 4

Bus

STEREO: 1
GROUP: 4
AUX SEND: 4 (incl. FX)

Input Channel Function

Pad (mono): 26dB
HPF (mono, mono/stereo): 80Hz, 12dB/oct (mono/stereo: MIC only)
COMP (Mono)

1-knob compressor (mono) (Gain/Threshold/Ratio) threshold: +22dBu to -8dBu
Ratio: 1:1 to 4:1
Output level: 0dB to 7dB
Attack time: Approx. 25 msec
Release time: Approx. 300 msec
EQ
High: Gain: +15dB/-15dB, frequency: 10kHz shelving
Mid: Gain: +15dB/-15dB, frequency: 2.5kHz peaking
Low: Gain: +15dB/-15dB, frequency: 100Hz shelving
Peak LED (mono)

LED turns on when post-EQ signal reaches 3dB below clipping

Power

Phantom power voltage: +48V
Power requirements: AC 100–240V, 50/60Hz
Power consumption: 30W

Other

Pre-monitor level meter: 2 x 12 segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB]
SPX algorithm: 24 programs
Dimensions (WxHxD): 17.5″ x 5.1″ x 19.7″
Net weight: 15 lb.